Visual Studio

[LillBerra]

Jag har ett mycket störande problem. Jag får något slags error medelande på nästan vad jag än klickar på. Det kan vara när jag går in på internet, när jag loggar in på MSN, eller spelar spel.

 

Såhär ser det ut: http://img268.imageshack.us/img268/821/debuggerjw7.jpg

 

Det där hände när jag försökte starta upp Mafia. Och om man klickar på OK eller kryssar errorn så stängs spelet ner. Jag förstår inte varför det kommer upp, någon som vet vad man ska göra?

 

Att formatera om datorn är helst min sista utväg. :/

[Gäst PoisoN]

Det ser illa ut, kanske nån Windows fil är sönder.

 

Du har inte nåt program som heter ''Visual Studio .NET'' ?

 

EDIT:

 

Felet kommer från SP2, gör detta för att fixa det:

KOPIERAT FRÅN MICROSOFT(LÄNKEN DIT FUNKAR INTE):

 

http://i113.photobucket.com/albums/n201/CraP0/exclamation.gif OBS KOLLA I SLUTET AV INLÄGGET FÖRST http://i113.photobucket.com/albums/n201/CraP0/exclamation.gif

 

SYMPTOMS

 

If you try to start or install an MS-DOS-based or a 16-bit Windows-based program on your Windows XP-based computer, you may receive an error message that is similar to one of the following:

16-bit MS-DOS Subsystem

path to the program that you are trying to start or install

C:\Winnt\System32\config.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.

16-bit MS-DOS Subsystem

path to the program that you are trying to start or install

config.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.

16-bit MS-DOS Subsystem

path to the program that you are trying to start or install

C:\Windows\System32\Autoexec.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.

Although you may be prompted to quit the program or ignore the error message, either selection makes the program quit.

Back to the top Back to the top

CAUSE

This issue may occur if one or more of the following files are missing or damaged:

• Config.nt

• Autoexec.nt

• Command.com

Back to the top Back to the top

RESOLUTION

To resolve this issue, use one of the following methods.

Back to the top Back to the top

Method 1

1. Insert the CD into the CD drive or DVD drive.

2. Click Start, and then click Run.

3. In the Open box, type cmd, and then click OK.

4. At the command prompt, type the following commands, pressing ENTER after each command:

 

expand CD-ROM Drive Letter:\i386\config.nt_ c:\windows\system32\config.nt

expand CD-ROM Drive Letter:\i386\autoexec.nt_ c:\windows\system32\autoexec.nt

expand CD-ROM Drive Letter:\i386\command.co_ c:\windows\system32\command.com

exit

5. Start or install the program. If the issue is resolved, do not complete the remaining steps. If the issue is not resolved, go to the next step.

6. Note: The Command.com file is not edited or created in the following process. Because of this, you may have to expand it from your Windows XP CD-ROM.

 

Start Notepad.

7. In Notepad, type the following entries:

 

dos=high, umb

device=%SYSTEMROOT%\system32\himem.sys

files=40

 

8. On the File menu, click Save As.

9. In the File Name box, type Config.nt, and then click Save. Close the Config.nt file.

10. On the File menu, click New.

11. In the new blank document, type the following entries:

 

@echo off

lh %SYSTEMROOT%\system32\mscdexnt.exe

lh %SYSTEMROOT%\system32\redir

lh %SYSTEMROOT%\system32\dosx

SET BLASTER=A220 I5 D1 P330 T3

 

12. On the File menu, click Save As.

13. In the File Name box, type Autoexec.nt, and then click Save. Close the Autoexec.nt file.

14. Start Windows Explorer. Locate the Config.nt file, right-click the Config.nt file, and then click Copy.

15. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.

16. Locate the Autoexec.nt file, right-click the Autoexec.nt file, and then click Copy.

17. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste.

18. Locate the Command.com file, right-click the expanded Command.com file, and then click Copy.

19. Right-click the %SYSTEMROOT%\System32 folder, and then click Paste. Restart your computer.

If the issue continues to occur, copy the Autoexec.nt and Config.nt files from the Repair folder in Windows to the System folder. To do so, follow these steps:

1. Click Start, click Run, type c:\windows\repair, and then click OK.

2. Right-click Autoexec.nt, and then click Copy.

3. Click Start, click Run, type c:\windows\system32, and then click OK.

4. Right-click anywhere in that folder, and then click Paste.

5. Right-click the Autoexec.nt file that you just copied, and then click Properties.

6. Click to select Read-Only, and then click OK.

7. Repeat steps 1 through 6 to copy the Config.nt file.

Note You must enable Read-Only permissions or the files will be removed after you restart Windows.

Back to the top Back to the top

Method 2

1. Click Start, click Run, type C:\windows\repair, and then click OK.

2. Right-click the Autoexec.nt file, and then click Copy.

3. Click Start, click Run, type %windir%\system32, and then click OK.

4. In the System32 folder, press Ctrl + V to paste the Autoexec.nt file in this folder.

 

 

 

Alternativt kan du bara ladda ner ett program som skriver om de filerna med nya, men jag garanterar inte att det kan funka.

Länk till programmet:

EDIT: Länk fixad :)

http://users.adelphia.net/~abraxas/dl/16bitSubsystemXP.exe

Hoppas det funkar :)

Redigerat 27 November 2006 av PoisoN

[LillBerra]

Aj då :/

Kollade igenom Lägg till eller Ta bort program, men hitta inget Visual Studio.NET eller liknande.

 

Gjorde däremot en sökning på Visual Studio, och fick fram några filer:

 

En mapp som heter Microsoft Visual Studio 8

Sen massa filer:

Microsoft.Visual.Studio.VSHELP

Microsoft.Visual.Studio.VSHELP80

Microsoft.Visual.Studio.VSPEnumerator.dll

Microsoft.Visual.Studio.VSPManagmentUI.dll

Microsoft.Visual.Studio.VS.ContentInstaller.dll

Microsoft.Visual.Studio.VSPEnumerator.resoruces.dll

Microsoft.Visual.Studio.vspManagmentUI.resources.dll

 

Tacksam för svar (:

 

Såg ej att du ändrade. Tack så mckt Posion, ska kolla.

Om det funkar så har du räddat mitt liv! (:

Redigerat 27 November 2006 av LillBerra